Keithley 6517B Reference Manual

Section 2: Getting started Model 6517B Electrometer Reference Manual
2-12 6517B-901-01 Rev. C / August 2015
Number Description Event
-154 "String too long" EE
-151 "Invalid string data" EE
-150 "String data error" EE
-148 "Character data not allowed" EE
-144 "Character data too long" EE
-141 "Invalid character data" EE
-140 "Character data error" EE
-128 "Numeric data not allowed" EE
-124 "Too many digits in number" EE
-123 "Exponent too large" EE
-121 "Invalid character in number" EE
-120 "Numeric data error" EE
-114 "Header suffix out of range" EE
-113 "Undefined header" EE
-112 "Program mnemonic too long" EE
-111 "Command Header Separator Error" EE
-110 "Command Header Error" EE
-109 "Missing Parameter" EE
-108 "Parameter not allowed" EE
-105 "GET not allowed." EE
-104 "Data Type Error" EE
-103 "Invalid Separator" EE
-102 "Syntax Error" EE
-101 "Invalid Character" EE
-100 "Command Error" EE
000 "No Error" SE
+101 "operation complete" SE
+121 "Device calibrating" SE
+122 "Device settling" SE
+123 "Device ranging" SE
+124 "Device sweeping" SE
+125 "Device measuring" SE
+126 "Device calculating" SE
+161 "Program running" SE
+171 "Waiting in trigger Layer" SE
+172 "Waiting in arm layer 1" SE
+173 "Waiting in arm layer 2" SE
+174 "Re-entering the idle layer" SE
+301 "Reading overflow" SE
+302 "Low limit 1 event" SE
+303 "High limit 1 event" SE
+304 "Low limit 2 event" SE
+305 "High limit 2 event" SE

Keithley 6517B Specifications

General

Input Impedance	>200 TΩ
Electrometer Type	Electrometer/High Resistance Meter
Current Measurement Range	20 fA to 20 mA
Display	Vacuum Fluorescent Display
Communication Interfaces	IEEE-488 (GPIB), RS-232
Power Supply	100 V / 120 V / 220 V / 240 V; 50 Hz / 60 Hz
Resistance Measurement Range	Up to 200 TΩ