Keithley 6517B

Section 15: Calibration procedure Model 6517B Electrometer Reference Manual
15-26 6517B-901-01 Rev. C / August 2015
Error Code Description
+121 Device calibrating
+122 Device settling
+123 Device ranging
+124 Device sweeping
+125 Measuring event
+126 Device calculating
+161 Program running
+171 Waiting in trigger layer
+172 Waiting in arm layer 1
+173 Waiting in arm layer 2
+174 Re-entering idle layer
+301 Reading overflow
+302 Low limit 1 event
+303 High limit 1 event
+304 Low limit 2 event
+305 High limit 2 event
+306 Reading available
+307 Reading underflow
+308 Buffer available
+309 Buffer half full
+310 Buffer full
+311 Test Sequence Measurement Done
+312 Buffer Pretriggered
+313 Reading out of limit
+314 8009 fixture lid open
+315 V-source compliance detected
+320 Buffer and format element mismatch