112 | 10 Creating your own styles
Options:
• TEMPO RANGE: Limit the range within reasonable BPM values within which the
audio rhythm responds with good quality. It is well known that it is practically
impossible in audio to achieve optimal stretching with Tempo values less than 40
and above 250 BPM.
• Below the BPM limit icons, select the equalization type: the standard value is FLAT,
but you can change it with LOUDNES1 and 2, BAS GAIN1 and 2, MID GAIN, HI
DAMP, BAS DAMP, HI GAIN1 and 2. Press EDIT to set GAIN and frequency and Q
of each frequency band (Low, Mid and Hi).
• AUTOCRASH: Select INTRO, ENDING, or FILL to enable automatic cymbalhit at the
end of the pattern. You can choose which Drum Kit cymbal to use (NOTE) and the
dynamics (VELO) with which it is played.
• COUNT IN LEVEL: Determine the volume level of the initial counting measure.
• MIDI DRUM BOOST: Apply the Boost (Volume Boost) to the MIDI DRUM part.
Values OFF, SOFT, HARD.
• REAL DRUM BOOST: Apply the Boost (Volume Boost) to the MIDI DRUM part.
Values OFF, SOFT, HARD.
• SINGLE/GLOBAL: In Global mode, the operations carried out affect the four
variations of the Arranger together (variation A, B, C and D). In Single mode, your
current actions are applied ONLY on the current variation you are in (e.g. Variation
A).
Press the EXIT button on the panel to return to the previous page.
To Next Page
Loading...
