13 Global menus and settings | 163
• EXPORT INS ON SAVE: Saves a copy of the MS3 INSTRUMENT in the
INSTRUMENT folder, when you save an INSTRUMENT.
• EXPORT WAVES ON IMPORT: Allows you to export wave files when loading an
MS3 file.
At the bottom, the general control buttons of the page:
• FORMAT: This button formats the memory area dedicated to the sampler and
clears all data contained therein. Be careful before confirming.
• BACKUP SBK: This button saves a copy of the SAMPLER's memory to a disk file
having the extension .SB3 ,inside the INSTRUMENT folder.
• LOAD SBK: This button restores a. SB3 file previously saved with the backup
procedure. This completely replaces the contents of the SAMPLER memory within
the INSTRUMENT folder.
• DEFRAG: This reorders the memory of the SAMPLER.
• EXPORT: Press this button to export an instrument previously saved in the
SAMPLER. You’ll then find a .MS3 file in the INSTRUMENT folder.
• IMPORT: Press this button on the screen to import a .ms3 file from disk from the
INSTRUMENT folder into EDIT.
• DELETE: Press this button on the screen to delete the data one of the
INSTRUMENTS saved in the SAMPLER. The operation is irreversible.
• DEEP ERASE: completely erases the memory area of the sampler. It can take
several minutes. Enable it and then start the formatting process.
To Next Page
Loading...
