Keysight Technologies E5260 Series User Manual

Keysight E5260/E5270 User’s Guide, Edition 6 5-5
Front Panel Operations
Setting Up Keysight E5260/E5270
To Set Line Frequency
1. Press the Menu key.
2. Move the cursor to CONFIG, then press the
Enter key.
3. Move the cursor to LINEFREQ, then press the
Enter key.
4. Press the arrow keys to select the line frequency 50 Hz or 60 Hz.
5. Press the
Enter key to make the setup effective, or press the Exit key to cancel
changing the setup.
6. Press the
Exit key twice to close the setup menu.
To Initialize Keysight E5260/E5270
1. Press the Shift key and the Local key.
2. Press the
Enter key for the message Reset:YES to initialize the Keysight
E5260/E5270, or press the
Exit key to cancel initialization.
To Set Beeper
1. Press the Menu key.
2. Move the cursor to BEEP, then press the
Enter key.
3. Press the arrow keys to select the beep ON or OFF.
4. Press the
Enter key to make the setup effective, or press the Exit key to cancel
changing the setup.
5. Press the
Exit key to close the setup menu.
To Apply Default Value
Specify a setup item by using the cursor, then press the DefValue key to apply the
default value to the setup item.

Keysight Technologies E5260 Series Specifications

General

Brand	Keysight Technologies
Model	E5260 Series
Category	Measuring Instruments
Language	English