Keysight Technologies E5260 Series User Manual

5-12 Keysight E5260/E5270 User’s Guide, Edition 6
Front Panel Operations
Setting Up Keysight E5260/E5270
To Read Error Message
1. Press the Menu key.
2. Move the cursor to ERROR, then press the
Enter key.
3. Move the cursor to DISPLAY, then press the
Enter key to display the message.
4. Press the arrow keys to read another error message. A maximum of four error
messages can be stored.
5. Press the
Exit key three times to close the setup menu.
To clear error buffer
1. Press the Menu key.
2. Move the cursor to ERROR, then press the
Enter key.
3. Move the cursor to CLEAR, then press the
Enter key.
4. Press the arrow key to select YES for the message Clear Error Buffer:.
5. Press the
Enter key to clear the error buffer, or press the Exit key to cancel
operation.
6. Press the
Exit key twice to close the setup menu.
To Display Firmware Revision
1. Press the Menu key.
2. Move the cursor to CONFIG, then press the
Enter key.
3. Move the cursor to REVISION, then press the
Enter key. The firmware revision
is displayed.
4. Press the
Exit key three times to close the setup menu.

Keysight Technologies E5260 Series Specifications

General

Brand	Keysight Technologies
Model	E5260 Series
Category	Measuring Instruments
Language	English