Keysight E5260/E5270 User’s Guide, Edition 6 3-15
Installation
Installing Accessories
To Connect 16442B Test Fixture
See this section if you use the Keysight 16442B Test Fixture. This section describes
how to set up the 16442B and how to connect the E5260/E5270 to the 16442B.
To Set up 16442B
You can stabilize the 16442B as shown in the figure below.
1. Put a stabilizer on both sides of the test fixture.
2. Attach each stabilizer to the test fixture with a flathead screw.
To Next Page
Loading...
