Keysight E5260/E5270 User’s Guide, Edition 6 5-23
Front Panel Operations
Making Measurement
To Abort Measurement
This instruction aborts measurement by all measurement channels.
1. Press the
Shift
key and the
Repeat
key.
2. Press the
Enter
key for the message Abort:YES to abort measurement, or
press the
Exit
key to cancel the abort operation.
To Select Measurement Item
1. Press the
MeasCh
key repeatedly to specify the measurement channel. The
channel number must appear in the M-ch status area.
2. Press the
MeasItem
key repeatedly to select the measurement item; voltage (V) or
current (A), both voltage and current, resistance (Ω), or power (W).
To Next Page
Loading...
Need help?
General
