5-6 Keysight E5260/E5270 User’s Guide, Edition 6
Front Panel Operations
Setting Up Keysight E5260/E5270
To Select Monitor Items
The following procedure selects the items displayed in the Setup Data area.
1. Press the
Menu
key.
2. Move the cursor to MON_ITEM, then press the
Enter
key.
3. Move the cursor to ITEM1 for the Setup Data 1 area, then press the
Enter
key.
4. Press the arrow keys to select the monitor item; OUT (source output value),
CPL (compliance value), VMR (voltage measurement range setting), IMR
(current measurement range setting), or ERR (error number).
5. Press the
Enter
key to make the setup effective, or press the
Exit
key to cancel
changing the setup.
6. Move the cursor to ITEM2 for the Setup Data 2 area, then press the
Enter
key.
7. Perform 4 and 5 to set the item for ITEM2.
8. Press the
Exit
key twice to close the setup menu.
To Next Page
Loading...
Need help?
General
