Keysight Technologies E5260 Series User Manual

Keysight E5260/E5270 User’s Guide, Edition 6 3-7
Installation
Requirements
NOTE The detachable power cable may be used as an emergency disconnecting device.
Removing the power cable will disconnect AC input power to the instrument.
Connect the power cable to the IEC 60320 connector on the rear of the instrument. If
the wrong power cable was shipped with your instrument, contact your nearest
Keysight Sales and Support Office.
The AC input on the back of your instrument is a universal AC input. It accepts
nominal line voltages in the range of 100 to 240 VAC.

Keysight Technologies E5260 Series Specifications

General

Brand	Keysight Technologies
Model	E5260 Series
Category	Measuring Instruments
Language	English