Konica Minolta 240f - Page 41

Konica Minolta 240f 3-13
3.2 Advanced scan features
3
6 Press [Close] twice.
7 Specify the destination, and press <Start>.
% For details on the procedure, refer to page 2-3.
Adjusting the hue
You can set the image hue (the balance of red and green, centered on light orange) to seven different levels,
from -3 (red) to +3 (green).
-: Turns the color tone red.
+: Turns the color tone green.
1 Load the document, and press <Scan>.
2 Press [Advanced].
3 Press [Color Adjust].
4 Press [Hue].
5 Select the hue, and press [Enter].
6 Press [Close] twice.
7 Specify the destination, and press <Start>.
% For details on the procedure, refer to page 2-3.
-3 -2 -1 0 1 2 3