Konica Minolta 240f - Selecting from the History

Konica Minolta 240f 6-13
6.1 Specifying destinations
6
6.1.5 Selecting from the history
Selecting from the dial history (Redial)
When transmitting a fax, you can select a destination from the history of the last 10 destinations entered using
the numeric keys. You can also edit the selected history before using it as a destination.
d
Transmission using destinations registered in the address book are not displayed in the dial history.
1 Press <Fax>.
2 Press [Redial].
% If [Redial] is not displayed, press [Advanced] and then se-
lect [Redial].
3 Select the destination you want to specify.
4 To change the fax number, edit the number, and press [Enter].
% To use the displayed fax number as it is, press [Enter] with-
out editing it.
5 When there are multiple destinations, repeat steps 2 and 4.