Konica Minolta 240f - Page 46

Advanced scan features
3
3-18 Konica Minolta 240f
3.2
5 Select the template to use, and press [Enter].
% If you want to enter a new subject and text without using a
template, select a box with nothing registered in it. If all the
boxes already have a template registered, select any box
from 01 to 10.
% If you selected [Auto Subject + Text], you cannot edit the
subject and mail text. Proceed to step 10.
% If you selected [Auto Subject], you can only edit the mail
text. Proceed to step 8.
6 Press [Subject].
% If you do not want to edit it, proceed to step 8.
7 Enter the subject, and press [Enter].
% Up to 80 characters can be entered for the subject.
% For details on entering characters, refer to Chapter 2, "En-
tering Characters" in the User's Guide Administrator Oper-
ations.
8 Press [Mail Text].
% If you do not want to edit it, proceed to step 10.
9 Enter the mail text, and press [Enter].
% Up to 1024 characters can be entered for the message.
% Press [ ] to enter a line break. A line break takes up two
characters.
% Press [ViewText] to confirm the mail text that has been en-
tered. After confirming, press [Edit] to return to the entry
screen.
% For details on entering characters, refer to Chapter 2, "En-
tering Characters" in the User's Guide Administrator Oper-
ations.
10 Press [Enter].
11 Press [Close].
12 Specify the destination, and press <Start>.
% For details on the procedure, refer to page 2-3.