Konica Minolta 240f - Page 48

Advanced scan features
3
3-20 Konica Minolta 240f
3.2
Using a registered file name
1 Load the document, and press <Scan>.
2 Press [File Name].
% If [File Name] is not displayed, press [Advanced] and then select [File Name].
3 Press [List].
4 Select the file name you want to use.
5 Edit the file name as necessary, and press [Enter].
% For details on entering characters, refer to Chapter 2, "En-
tering Characters" in the User's Guide Administrator Oper-
ations.
% If you do not want to edit it, proceed to step 6.
6 Specify the destination, and press <Start>.
% For details on the procedure, refer to page 2-3.