Konica Minolta 240f - Page 73

Konica Minolta 240f 4-7
4.1 Initial setup (User install)
4
Setting the broadcast transmission option
Select whether to start transmission when registered destination is selected ("OFF"), or when <Start> is
pressed with all destinations selected ("ON").
d
The broadcast setting is enabled for both scan transmission and fax transmission.
1 Press <Setting>.
2 Press [Management].
% If an administrator password is set, enter the password and press [Enter].
3 Press [User Install].
4 Press [Broadcast].
5 Select [ON] or [OFF], and press [Enter].