Ch.4 Description of Screens
< 112 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
[Film Size] Button
Enables selection of film size for image output.
• The film size selection screen is displayed.
[Orientation] Button
Enables selection of direction of the image output.
"Portrait" or "Landscape" may be selected.
• Each time the button is touched, the setting changes.
(Portrait <--> Landscape).
[Mag. Method] Button
Enables selection of the method of image output.
• Each time the button is touched, the setting changes
(Full <--> Actual).
[Full]
The image is output in expanded or reduced format to
match the image-read size and the output image size.
[Actual]
The image is expanded/reduced and output at maximum
film size.
Note, however, that even if the film size is larger than the
image size, the image output will be no larger than for the
[Full] setting.
Trimming
Print Format
Enables selection of the image output format.
[1 on 1] Button
[A] The image is output in single-image format.
[AA] Two of the same image are output left/right-aligned.
A
Two of the same image are output vertically-aligned.
A
[2 on 1] Button
[AB] Two different images are output left/right-aligned.
A
Two different images are output vertically-aligned.
B
[ ]
[ ]
To Next Page
Loading...
Need help?
General
