Ch.3 Sequence of Examination
< 39 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
The procedure for carrying out an examination using a cassette reader without a bar code reader with the examination
check screen in single-image format is described below.
Exposure [Single-Image Format/Cassette Reader + Screen Menu Selection]
1 Touch the order to be read on the order list.
• The reading sequence will be displayed according
to the touch sequence.
• Touching again an order displayed in the
reading sequence will result in cancellation of
reading of that order and deletion from the reading
sequence.
2 After exposure, insert the cassette into the cassette
insertion slot in the sequence set in step
1.
• The image read from the cassette will be displayed
in the image display field corresponding to the
order "#1".
• Each time the reading is completed, the reading
order of each order will be descended.
p.81 Examination
Check
Screen
[Single-Image
Screen]
p.45, 46
Image Output
(Single-Image Format)
p.95
Patient Data
Amendment Screen
p.98
Body Part/ Parameter
Selection Screen
p.103
Detailed Data
Setting Screen
(Image Processing)
p.111
Detailed Data
Setting Screen
(Print Format)
p.118
Detailed Data
Setting Screen
(Overlay)
Following this screen:
Select the target
order from the
order list.
Amending patient data
Amending exposure parameters/
Adding or deleting the order
Amending image processing
Select the target
order from the
order list.
Select the target
order from the
order list.
Amending print format
Amending overlay
Image
Display
Field
To Next Page
Loading...
Need help?
General
