Ch.3 Sequence of Examination
< 44 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
The procedure for carrying out an examination using a cassette reader without a bar code reader with the examination
check screen in multiple-image format is described below.
Exposure [Multiple-Image Format/Cassette Reader + Screen Menu Selection]
1 Touch the order to be read on the order list.
• The reading sequence will be displayed according
to the touch sequence.
• Touching again an order displayed in the reading
sequence will result in cancellation of reading of
that order and deletion from the reading sequence.
2 After exposure, insert the cassette into the cas-
sette reader insertion slot in the sequence set in
step
1.
• The image read from the cassette will be displayed
in the image display field corresponding to the
order "#1".
• The S-value of the image read will be displayed
below the image display field.
• Each time the reading is completed, the reading
sequence of each order will be descended.
The automatic confir-
mation function cannot
be used in the multiple-
image format.
p.45, 46
Image Output
(Single-Image Format)
p.95
Patient Data
Amendment Screen
p.98
Body Part/ Parameter
Selection Screen
p.103
Detailed Data
Setting Screen
(Image Processing)
p.111
Detailed Data
Setting Screen
(Print Format)
p.118
Detailed Data
Setting Screen
(Overlay)
Following this screen:
Select the target
order from the
order list.
Amending patient data
Amending exposure parameters/
Adding or deleting the order
Amending image processing
Select the target
order from the
order list.
Select the target
order from the
order list.
Amending print format
Amending overlay
Image
Display
Field
To Next Page
Loading...
Need help?
General
