Ch.3 Sequence of Examination
< 54 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
9 Touch the [OK] button to output the Image.
The image read is output in 2 frames on 1 film in accordance with set parameters.
Image processing of Primary and Secondary images is carried out according to
image processing conditions registered in parameter keys selected prior to expo-
sure.
When trimming is carried out with "equal-size output" selected as the method of out-
put, the image read is output after trimming using the image centre as base.
2 on 1 Output Procedure
1 Expose following the normal procedure.
2 Touch the image display field where "2 on 1 out-
put" is to be carried out as a first image.
•A detailed data setting screen (image processing)
will be displayed.
3 Touch the "Print Format" tab.
•A detailed data setting screen (print format) will be
displayed.
4 Touch the "2 on 1" button in the "Print Format" col-
umn and select the direction in which the two
images are to be aligned.
• The character "A" represents the printed position
of the first image, the character "B" that of the sec-
ond image.
• The relative positions of the two images are deter-
mined by the order in which they are output (by
touching the "OK" button). However, these posi-
tions may be switched when the second image is
output.
p.36-44 Exposure
If there are images for
which examination has
been completed, the 2
on 1 output can be car-
ried out through the
examination history
screen.
p.103
Detailed Data
Setting Screen
(Image Processing)
p.111
Detailed Data
Setting Screen
(Print Format)
The secondary image will be
displayed.
8 Touch the [OK] button.
• Display will return to the examination check
screen.
8
9
2
3
4
To Next Page
Loading...
Need help?
General
