Krone EasyCut B 1000 CV - Menu 9-1 Softkeys ISO Terminal

KRONE ISOBUS-Terminal CCI 100
125
ZX400107
Fig. 80
Main menu 9 "ISO Settings" appears.
• Press the
key to open menu 9-1 ( )
The display shows menu 9-1 "Softkeys ISO terminal".
The current status is displayed as a symbol:
Change the basic screen to 5 softkey buttons
Change the basic screen to 10 softkey buttons
The
icon in the upper line indicates that the displayed status is saved.
Change and save status
• Set the desired status with the
or key. The icon in the top line goes out.
• Press the
key. The set status is saved and the icon appears in the upper line.
• You can use the
key to close the menu currently displayed.
• Pressing the
key for a little longer calls up the basic screen
Pos: 61.46.59 /Layout Module /---------------Seitenumbruch--------------- - @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1