Krone EasyCut B 1000 CV - ISOBUS Short Cut Button Functionality

KRONE ISOBUS-Terminal CCI 100
48
Pos: 61.10.1 /Überschr iften/Überschri ften 2/F-J/I SOBUS Short Cut Button @ 47\mod_128556 4773000_78.docx @ 45641 0 @ 2 @ 1
8.2 ISOBUS Short Cut Button
Pos: 61.10.2 /BA/I nfo-Center/CCI- ISOBUS-Terminal/Module f ür Beipack/ISOBUS Shor t Cut Button/ISOBUS Short Cu t Button_2 Gefahr @ 46\mod_128 2643782875_78.doc x @ 447376 @ @ 1
DANGER! – risk of injury by running machine!
Your machine supports the ISOBUS short cut button.
• By actuation of the ISOBUS short cut button (1) the machine functions are switched off in
order to be able to initiate a secure condition of the machine in hazardous situations.
Process oriented procedures perform to the end. Therefore, machine parts continue to run
after actuating the ISOBUS short cut button. This can lead to injuries
• The ISOBUS short cut button does in no case interfere with tractor functions, i.e. neither
universal shaft functions nor hydraulic functions will be affected in any way! Therefore, the
machine can continue to run after actuating the ISOBUS short cut button. This can lead to
injuries
Pos: 61.10.3 /BA/I nfo-Center/CCI- ISOBUS-Terminal/Module f ür Beipack/ISOBUS Shor t Cut Button/ISOBUS Short Cu t Button_wird betätig t_EasyCut B 1000 @ 95\mod_13 28681944959_78.doc x @ 800195 @ @ 1
By hitting the ISOBUS Short Cut Button (as emergency pushbutton) (1) on the terminal a STOP
signal is sent to the ISOBUS. This signal is evaluated by your connected ISOBUS machine in
order to trigger automatic measures in a hazard situation.
Activating the ISOBUS Short Cut Button will call up the appropriate alarm screen on the display:
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11F11
F12
ESC
CC000070
ISB
1
Fig. 22
The job computer will then block the following functions on the machine side.
• all hydraulic functions (e.g. raising / lowering the mowing units …)
CAUTION! – The cross conveyor continues running
Where a cross conveyor is fitted the cross conveyor drive is not switched off when the
ISOBUS Short Cut Button is pressed.
Pos: 61.10.4 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1