Maintenance
169
Pos: 76.9 /Überschri ften/Überschrif ten 2/U-Z/Wartungstabe lle @ 65\mod_130036941 3064_78.docx @ 583966 @ 2 @ 1
16.3 Maintenance table
Pos: 76.10 /BA/W artung/Mähwerke/Wartungs tabelle - EasyCut mit Reibk upplung @ 193\mod_138323 3458804_78.doc x @ 1647358 @ @ 1
Maintenance work
Maintenance interval
Once
after 10 hours
Before the beginning of the
season
Every 10 hours but at least
1x daily
Once
after 50 hours
Every 50 hours
Every 200 hours
Cutter bar
Oil level check
X X
Oil change
not required
All gearboxes
Oil level check
X X
Oil change X
X
Checking the cutter blades
X X
Check the retaining bolts for cutter blades
X X
Check the material thickness of the leaf springs, with
blade quick-fit device design
X X
Cutting disc / blade drum X X
Linings on the cutter bar X
Tighten the screws / nuts
All screws
X
X
Friction clutch
Vent
X
Guard cloths
Check the guard cloth for wear and damage
X
Pos: 76.11 /Layout Module /---------------Seitenumbruc h---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
