Krone EasyCut B 1000 CV - Procedure After Shear Pin Failure

Maintenance
174
Pos: 78.8 /BA/War tung/Mähwerke/Schersi cherung/Nach dem Abscheren Ea syCut @ 3\mod_120420 5154608_78.docx @ 69944 @ 3 @ 1
16.6.1 After Shearing Off
Caution! - Correct installation position of the bearing housing not observed.
Effect: Damage to the machine
• Right rotating (RE/RZ) cutting discs and drums always have right-handed pinion shafts and
nuts (no groove mark on the pinion shaft and nut).
• Left rotating (LE/LZ) cutting discs and drums always have left-handed pinion shafts and nuts
(with groove mark on the pinion shaft and nut).
1
3
2
8
7
3
4
c
d
a
9
b
EC-255-0
10
3a
3a
3a
Fig. 110