Krone EasyCut B 1000 CV - Cross Conveyor Basic Dialogue

KRONE ISOBUS CCI 100 Terminal / manual mode
74
Pos: 61.39.11.1 /Über schriften/Überschr iften 2/F-J/Gr undbild Querförderband ( optional) @ 93\mod_132706 1321945_78.doc x @ 786314 @ 2 @ 1
9.6 Cross conveyor basic dialogue (optional)
Pos: 61.39.11.2 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- Swadro/Swadro 1400 Gefahr Schnellstop (2014- 10-07 11:55:57) @ 56\mod_1 295362873734_78.doc x @ 542364 @ @ 1
DANGER! - Before swivelling the machine, ensure that nobody is within the swivel
range.
Effect: Danger to life or serious injuries.
• Instruct persons to leave the danger zone.
• If required, switch off the machine immediately.
• If there is an imminent danger, press the function key for to stop all functions which
are currently being performed.
Pos: 61.39.11.3 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/ Grundbild Querförder bandGrundbild QFB Bi ld (2014-10-07 16:06:21) @ 93\mod_1327393429838_ 78.docx @ 787773 @ @ 1
Fig. 43
Pos: 61.39.11.4 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/ Grundbild Querförder bandGrundbild QFB hebe n/senken Einführte xt (2014-10-07 16:08:10) @ 93\mod_1327394554268 _78.docx @ 787830 @ @ 1
The 'Raise / Lower cross conveyor' basic dialogue only appears when the mowing unit is
equipped with a cross conveyor and both lateral mowing units are in the headland position or
working position.
Pos: 61.39.11.5 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/ Grundbild Querförder bandQFB rechts heben/sen ken (2014-10-07 16: 13:23) @ 93\mod_1327394796 282_78.docx @ 787858 @ 3 @ 1
9.6.1 Raise / Lower right-hand cross conveyor
Preselect the right-hand cross conveyor by pressing the function key for
. (The symbol is
highlighted in colour).
Press and hold the function key for
to raise the preselected cross conveyor.
Press and hold the function key for
to lower the preselected cross conveyor.
Pos: 61.39.11.6 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/ Grundbild Querförder bandQFB links heben/ senken (2014-10-07 16: 19:53) @ 93\mod_132739580 1380_78.docx @ 787914 @ 3 @ 1
9.6.2 Raise / Lower left-hand cross conveyor
Preselect the left-hand cross conveyor by pressing the function key for
. (The symbol is
highlighted in colour).
Press and hold the function key for
to raise the preselected cross conveyor.
Press and hold the function key for
to lower the preselected cross conveyor.
Pos: 61.39.11.7 /Layout Module /---------------Seitenumbruch---------------- @ 0\ mod_1196175311226_0.doc x @ 4165 @ @ 1