Krone EasyCut B 1000 CV - Menu 1-2 Setting Lateral Displacement

KRONE ISOBUS-Terminal CCI 100
95
Pos: 61.46.15 /BA/I nfo-Center/CCI- ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/ Hauptmenüs/Haupt menüs alte Ausführung/ Hauptmenü 1 Einstel lungen/Menü 1-2 Breitenver schiebung einstel len @ 93\mod_1327506050 083_78.docx @ 790805 @ 3 @ 1
11.2.2 Menu 1-2 'Setting lateral displacement'
1-2
CC000519
Auto
Fig. 54
Main menu 1 'Settings' appears.
• Press function key
or to select menu 1-2 (
Auto
). The symbol is displayed with a
grey background.
• Press function key
The display shows menu 1-2 'Setting lateral displacement'.
The lateral displacement function allows both lateral mowing units to be shifted to the right or
left at the same time (for mowing in one direction, then the other), so that when mowing on a
slope no crop sections remain standing. The upper values (A) can be adopted automatically
diagonally for the lower values (B).
• Select the selection box (A) using the scroll wheel. The selection box is highlighted in
colour.
• Press the scroll wheel (a new input field appears).
• Turning the scroll wheel increases or reduces the value.
• Press the scroll wheel to apply the setting and exit the selection box.
• Press function key
to close the currently displayed menu.
• Pressing the
key for a little longer calls up the basic screen.
Pos: 61.46.16 /BA/I nfo-Center/CCI- ISOBUS-Terminal/CCI- Rundballenpressen/ Grundbild/Hinweis Ei nstellung über Touchsc reen @ 79\mod_1315290 154790_78.docx @ 701913 @ @ 1
Note
The values can also be set via the touchscreen.
Pos: 61.46.17 /Layout Module /---------------Seitenumbruch--------------- - @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1