Krone EasyCut B 1000 CV - Lighting; Lighting Connection

Start-up
42
Pos: 59.26 /Überschr iften/Überschrif ten 2/A-E/Beleuchtung @ 0\ mod_1195658399935_78. docx @ 1881 @ 2 @ 1
7.5 Lighting
Pos: 59.27 /BA/Sic herheit/Fahren und Transp ort/Beleuchtung/Be leuchtungsanlage al le Maschinen @ 7\mod_1215 519058839_78.doc x @ 103206 @ @ 1
Danger! - Lighting system
Effect: Danger to life, serious injuries or serious damage to the machine.
• Before transporting on public roads, always connect the lighting system and perform a
function check.
• Keep the lighting system clean. Soiled lights and spotlights impair road safety.
• Replace defective light bulbs or broken spotlights.
• When transporting on public highways, the machine must be in the transport position.
Pos: 59.28 /Überschr iften/Überschrif ten 2/A-E/Beleuchtung a nschließen @ 33\mod_12543 85308979_78.doc x @ 319105 @ 2 @ 1
7.6 Lighting connection
Pos: 59.29 /BA/Inbetr iebnahme/EasyCut/Be leuchtung/Anschlu ss Beleuchtung T1 EC 7540/ 9140 @ 11\mod_1223384700 516_78.docx @ 145926 @ @ 1
To comply with the Road Traffic Licensing Regulations, the machine is equipped as follows by
default:
• 3-chamber rear lamps (3) (direction indicator: reversing light and brake light)
• with red reflectors on the rear (4)
• with lateral yellow reflectors on the rear (5)
Pos: 59.30 /BA/Inbetr iebnahme/EasyCut/Be leuchtung/Anschlu ss Beleuchtung T2 Bild EC B 1000 @ 98\mod_132940794283 1_78.docx @ 878933 @ @ 1
4
ECB00025
2
3
1
5
Fig. 16
Pos: 59.31 /BA/Inbetr iebnahme/EasyCut/Be leuchtung/Anschlu ss Beleuchtung T3 EC 2800/ 3200 3210/4013/7540/ 9140 @ 11\mod_12224216347 49_78.docx @ 141790 @ @ 1
The lighting system is connected via the 7-pin connection cable (2).
To do this:
• Insert the 7-pin connection cable plug (2) into the appropriate socket (1) of the machine.
• Insert the 7-pin connection cable plug (2) into the appropriate socket of the tractor.
• Position the cable so that it will not come in contact with the wheels.
Pos: 59.32 /BA/Inbetr iebnahme/Schwader/ Hinweis Sauberkeit der Stecker und Steckdosen @ 2\mod_1202399563131_7 8.docx @ 59273 @ @ 1
Note
Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!
Pos: 59.33 /Layout Module /---------------Seitenumbruc h---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1