Krone EasyCut B 1000 CV - Main Window Displays (II) - Automatic Mode

KRONE ISOBUS CCI 100 Terminal / automatic mode
80
Pos: 61.43.1.11 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/A nzeigenbereic he Display Automatikbe tireb/Anzeigen im Haup tfenster (II) Bi ld Auto @ 93\mod_1327421042254_78. docx @ 789401 @ 3 @ 1
10.1.2 Displays in the main window (II)
Fig. 47
Pos: 61.43.1.12 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/Anzeigen i m HauptfensterAnzeigen i m Hauptfenster T1 Handbetr ieb / Automatikbe trieb (2014-10-06 15:20: 33) @ 92\mod_132697122 4964_78.docx @ 784154 @ @ 1
h
1
Operating hours counter current customer counter (This operating hours counter runs
when the electronics are turned on and the operating hours counter is activated.).
Overall surface counter (Only appears when the signal 'forward movement' is sent from
the tractor to the job computer of the machine.)
Set swath roller height (left) (0% to 100%)
Set swath roller height (right) (0% to 100%)
Set speed of the cross conveyors (50% to 100%)
Set mowing unit suspension (0% to 100%)
Pos: 61.43.1.13 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/A nzeigenbereic he Display Automatikbe tireb/Anzeigen im Haup tfenster T1.1 nur für Autobetrieb @ 95\mod_1328687 745837_78.doc x @ 800440 @ @ 1
Set lateral displacement (0 to 40 cm in 8 cm steps)
Pos: 61.43.1.14 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/ Über die Berührung des Bi ldschirms können die W erte (1) direkt geänder t werden. @ 91\mod_13264465 44056_78.docx @ 779638 @ @ 1
Note
Values can be changed directly by touching the screen (1).
Pos: 61.43.1.15 /Layout Module /---------------Seitenumbruch---------------- @ 0\ mod_1196175311226_0.doc x @ 4165 @ @ 1