Krone EasyCut B 1000 CV - Adjusting Safety Guards

Settings
154
Pos: 71.9 /Überschri ften/Überschrif ten 2/A-E/Einstellung der Schutze @ 3\mod_12047090 91570_78.docx @ 71854 @ 2 @ 1
15.2 Adjusting the Guards
Pos: 71.10 /BA/Sic herheit/7. Gefahrenhin weise alt/Mähwerke/ Gefahr - Fortschleuder n von Steinen @ 84\mod_1318311 844997_78.doc x @ 733435 @ @ 1
DANGER! – Stones forcibly projected during operation
Effect: Danger to life or serious injuries.
• Check the guard cloths regularly. Worn or damaged guard cloths must be replaced!
• The protective equipment on the mowing unit, e.g. cloths and hoods, protects against flying
stones and similar objects, and also prevents access to dangerous parts. Because of this,
you must always move it to its protective position before starting work
• Fold the side plate(s) down and secure with twist locks before use
Pos: 71.11 /BA/Einste llungen/Mähwerke/Sei tliche Schutze neu e Generation CV-Ausführ ung @ 116\mod_13406322858 65_78.docx @ 1017286 @ 3 @ 1
15.2.1 Lateral Guards
Fig. 97
The height of the outer guard (1) and of the inner guard (2) can be adjusted.
Adjusting the outer guard (1):
• Fold up the guard (1)
• Loosen the screws (4)
• Adjust the height of the guard by using the mounting bar (5)
• Tighten the screws (4)
Adjusting the inner guard (2):
• Fold up the guard front (3)
• Loosen the screws (6)
• Adjust the height of the guard by using the mounting bar (7)
• Tighten the screws (6)
Pos: 71.12 /Layout Module /---------------Seitenumbruc h---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1