Kyocera 408ci - Page 440

8-57
Setup and Registration (System Menu) > System Menu
Others
Protocol Settings
[System Menu/Counter] key > [Network Settings] > "Network Settings" [Protocol Settings]
Configure protocol settings.
Item Description
LAN Interface Specify the settings for the LAN interface to be used.
Value:
Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-TX Half, 100BASE-TX Full,
1000BASE-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
SMTP (Email TX) Email Settings (page 8-37)
POP3 (Email RX) POP3 (page 8-37)
FTP Client (Transmission) FTP Settings (page 8-38)
FTP Server
(Reception)
Protocol
Settings
Select whether to receive documents using FTP.
*1
Value: Off, On
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
SMB Client (Transmission) SMB Settings (page 8-38)
NetBEUI Protocol
Settings
Selects whether to receive documents using NetBEUI.
*1
Value: Off, On
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
WSD Scan WSD Scan (page 8-38)
WSD Print WSD Print (page 8-38)
iFax Select whether to use i-FAX.
Value: Off, On
NOTE
This function is displayed when the optional Internet FAX Kit is activated.
DSM Scan DSM Scan (page 8-38)