Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
1-3-46
U108 Adj Sepa Sbias
Description
Adjusts output of separation shift bias and ON/OFF timing.
Purpose
To set when the separated malfunction of the paper occurs.
Method
1. Press the start key.
2. Select the item to be set.
Display
Normal
Mormal23
Light
Setting:[Normal/Mormal23]
1. Select the item to be set.
2. Change the value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display Description
Setting
range
Initial setting
Mode ON/OFF timing adjustment with paper
position.
0 to 7 0/6
Sepa Separation mode of plain paper. 2 to 3 2/2
3. Press the start key. The value is set.
Setting:[Light]
1. Select the item to be set.
2. Change the value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display Description
Setting
range
Initial setting
Sepa Separation mode of plain paper. 1 to 2 0/2
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt
copying mode (which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.