Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9-3
2-3-10
(3-3) PF-480
CH: Check, CL: Clean, AD: Adjust, LU: Lubrication, RE: Replace
* : Please do not use spray containing flamable gas for air-blow or air-brush purposes.
(3-4) DU-480
CH: Check, CL: Clean, AD: Adjust, LU: Lubrication, RE: Replace
* : Please do not use spray containing flamable gas for air-blow or air-brush purposes.
Section
Maintenance
part/location
User
call
Periodic
maintenance
(x1000 counts)
Points and cautions Page
PF sec-
tion
PF paer feed roller
CH
RE
CH: Alcohol or dry cloth if it is dirty.
Replace if there are any problems
such as damage or friction.
P.1-5-
101
PF retard roller
CH
RE
CH: Alcohol or dry cloth if it is dirty.
Replace if there are any problems
such as damage or friction.
P.1-5-
103
PF pickup roller
CH
RE
CH: Alcohol or dry cloth if it is dirty.
Replace if there are any problems
such as damage or friction.
P.1-5-
101
PF paer feed roller
CH
RE
CH: Alcohol or dry cloth if it is dirty.
Replace if there are any problems
such as damage or friction.
P.1-5-96
PF conveying pulley CH
CL
CH: Alcohol or dry cloth if it is dirty. -
Section
Maintenance
part/location
User
call
Periodic
maintenance
(x1000 counts)
Points and cautions Page
PF sec-
tion
DU feed roller
CH
RE
CH: Alcohol or dry cloth if it is dirty.
Replace if there are any problems
such as damage or friction.
P.1-5-51