Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
1-3-67
U326 Set clean Bk Line
Description
Sets whether to display the cleaning guidance when detecting the black line.
Purpose
Displays the cleaning guidance in order to make the call for service with the black line decrease by
the rubbish on the contact glass when scanning from the DP.
Method
1. Press the start key.
* : Select the item to set.
Display Description
Black Line Mode Black line cleaning guidance ON/OFF setting
Black Line Cnt Setting counts of the cleaning guidance indication
Setting: [Black Line Mode]
1. Select On or Off.
Display Description
On Displays the cleaning guidance
Off Not to display the cleaning guidance
* : Initial setting: On
2. Press the start key. The setting is set.
Setting: [Black Line Cnt]
1. Select [Cnt].
2. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display Description Setting range Initial setting
Cnt Setting counts of the cleaning guidance
indication ( x 1000 sheets)
0 to 255 8
1. When setting is 0, the black line cleaning indication is displayed only if the black line is
detected.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.