Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
1-3-27
U035 Adj Folio Sz
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the actual
printing area for folio paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display Description Setting range Initial setting
Length Height of a FOLIO paper. 330 to 356(mm) 330
Width Width of a FOLIO paper. 200 to 220(mm) 210
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U037 Chk Fan Motor
Description
Drives each fan motor.
Purpose
To check the operation of each fan motor.
Method
1. Press the start key.
2. Select the fan motor to be operated.
3. Press the start key. The operation starts.
Display Description
Main board Main board fan motor is turned on.
* : A fan motor cannot be operated while an engine drives.
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.