Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
1-3-29
U053 Adj Motor Speed
Description
Performs fine adjustment of the speeds of the motors.
Purpose
To adjust the speed of the respective motors when the magnification is not correct.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display Description
Setting
range
Initial
setting
Change in value
per step
Main Main motor speed adjustment. -50 to 50 0 1
Polygon Polygon motor speed adjustment. -50 to 50 0 1
Exit Eject motor speed adjustment. -50 to 50 0 1
MPF Main motor MPF speed adjustment. -50 to 50 -2 1
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.