2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-8
(1-2) Detaching and refitting the retard roller
Procedure
1. Remove two screws from the lower
paper feed assembly.
Figure 1-5-12
2. Release the hook in two square holes
of the retard guide using flat screw
driver.
3. Remove the retard guide.
Figure 1-5-13
Retard guide
Lower feed assembly
Screw
Screw
Retard guide
Flat screwdriver
Lower feed assembly
Hook
Hook
Square hole
Square hole
To Next Page
Loading...
