Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
1-3-53
U150 Chk Toner Sensor
Description
Displays the status of each sensor associated with the toner.
Purpose
To check if the sensors operate correctly.
Method
1. Press the start key.
Display Description
Dev sensor State of the developer sensor.
2. Check the status of sensor. The current value is displayed.
* : Developer sensor are acquired and re-displayed periodically.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U156 Adj Tnr Ctrl Lv
Description
A toner supply level is adjusted.
Purpose
A toner supply level is adjusted.
Method
1. Press the start key.
2. Select the item to be adjust.
3. Change the value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display Description
Setting range
Initial
setting
Supply(H) The maximum threshold value of toner
supply.
0.09 to 2.55 1.30
Supply(L) The minimum threshold value of toner
supply.
0.09 to 2.55 1.00
SUpply(PH) The prohibition threshold value of toner
supply.
0.09 to 2.55 1.50
On Time Time to turn on a toner motor. 50 to 2000 500
Off Time Time to turn off a toner motor. 50 to 2000 100
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.