Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-98
(1) Detaching and refitting the PF feed motor
Procedure
1. Remove two screws.
2. Remove the PF rear cover by leaning
forward and taking upward.
Figure 1-5-170
3. Remove the connectors from PF main
PWB.
Figure 1-5-171
Screw
Screw
Projection
PF rear cover
PF unit
PF main PWB connectors
YC3
YC4
YC5
YC6
YC2
YC1
PF main PWB