Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-3-114
U905 Option Cnt
Description
Displays the counts of DP.
Purpose
To check the use of DP.
Method
1. Press the start key.
2. Select [DP]. The count is displayed.
Display Description
DP Counts of DP
Method: [DP]
Display Description
ADP Counts of single-sided originals that has passed through the DP.
RADP Counts of double-sided originals that has passed through the DP.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U906 Reset Dis Func
Description
Resets the service call code for partial operation control.
Purpose
To be reset after partial operation is performed due to problems in the casettes or other sections,
and the related parts are serviced.
Method
1. Press the start key.
2. Press [Execute].
Display Description
Execute Resets the service call code for partial operation control.
3. Press the start key to reset partial operation control.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.