Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9-4
1-3-69
U341 Set Prn Cass
Description
Sets a paper feed location specified for printer output.
Purpose
To use a paper feed location only for printer output.
A paper feed location specified for printer output cannot be used for copy output.
1. Press the start key.
2. Select the paper feed location for the printer.
Two or more cassette can be selected.
3. Select On or Off.
Display Description Setting
range
Initial setting
Cas1 Cassette 1 On/Off On
Cas2 Cassette 2 (optional paper feeder) On/Off On
Cas3 Cassette 3 (optional paper feeder) On/Off On
Cas4 Cassette 4 (optional paper feeder) On/Off On
* : When an optional paper feed device is not installed, the corresponding count is not dis-
played.
* : When the FAX system is installed and there is only one paper cassette, be sure not to
select the paper feed location only for the printer output.
Received FAX documents will not be able to print.
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U343 Set Dup PriMode
Description
Switches the initial setting between duplex and simplex copy.
Purpose
To be set according to frequency of use: set to the more frequently used mode.
Setting
1. Press the start key.
2. Select [On] or [Off].
Display Description
On Duplex copy.
Off Simplex copy.
* : Initial setting: Off
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.