2NC/2NF/2NG/2NN/3P7/3P8/3P9-4
1-4-94
1-4-9 Send error code
The error generated at the time of PushScan is shown.
Detection of an error will display the following error message on MFP panel.
Send Error message Cause Corrective Action / Comments
USB connection was cut. It was drawn out while the USB cable
communicated. Or the USB cable is
not connected correctly.
A USB cable is re-connected. The JOB
is uncontinuable.
JOB which this error generated is can-
celed compulsorily.
Network connection was
cut.
It was drawn out while the Network
cable communicated. Or the Net-
work cable is not connected cor-
rectly.
A Network cable is re-connected. The
JOB is uncontinuable.
JOB which this error generated is can-
celed compulsorily.
An error occurs in image
processing.
The error was detected while pro-
cessing the picture which the PC
side received.
Please reconfirm whether it is what is
permitted that the manuscript scans.
The JOB is uncontinuable.
JOB which this error generated is can-
celed compulsorily.
To Next Page
Loading...
