2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
1-3-105
U660 Set Calls
Description
Makes setting regarding the network control unit (NCU).
Purpose
To be executed as required.
Method
1. Press the start key.
* : Select the item to be set.
Display Description
Exchange Sets the connection to PBX/PSTN.
Dial Tone Sets PSTN dial tone detection.
Busy Tone Sets busy tone detection.
PBX Setting Setting for a PBX.
DC Loop Sets the loop current detection before dialing.
Setting: Exchange
Selects if a fax is to be connected to either a PBX or public switched telephone network.
1. Select the setting.
Display Description
PSTN Connected to the public switched telephone network.
PBX Connected to a PBX.
* : Initial setting: PSTN
2. Press the start key. The setting is set.
Setting: Dial Tone
Selects if the dial tone is detected to check the telephone is off the hook when a fax is connected
to a public switched telephone network.
1. Select the setting.
Display Description
On Detects the dial tone.
Off Does not detect the dial tone.
* : Initial setting: On
2. Press the start key. The setting is set.
To Next Page
Loading...
