2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-17
(1-1) Detaching and refitting the exposure lamp
Procedure
1. Raise the operation panel cover A using
a flat screw driver and then remove it by
sliding.
2. Raise the operation panel cover B using
a flat screw driver and then remove it by
sliding.
Figure 1-5-25
3. Remove the clear panel.
4. Remove the operation panel sheet.
Figure 1-5-26
Flat screwdriver
Projection
portion
Operation panel cover
Clear panel
Operation panel sheet
To Next Page
Loading...
