Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9
2-2-40
(3) Connector lists
Connector Pin Signal I/O Voltage Description
YC1
1 PFPAUSE
I 0/3.3 V DC PF control signal
Connected to
main/engine
PWB or PF
main PWB
2 PFSEL2
I 0/3.3 V DC PF select signal
3 PFSEL1
I 0/3.3 V DC PF select signal
4 PFSEL0
I 0/3.3 V DC PF select signal
5 PFRDY
O 0/3.3 V DC PF ready signal
6 PFSET
O 0/3.3 V DC PF set signal
7PFSI
O 0/3.3 V DC Serial communication data signal
8PFSO
I 0/3.3 V DC Serial communication data signal
9PFCLK
I 0/3.3 V DC(pulse) PF clock signal
10 3.3V4
I 3.3 V DC 3.3 V DC input from M/EPWB
11 +3.3V2
I 3.3 V DC 3.3 V DC input from M/EPWB
12 SGND
- - Ground
YC2
1 PFPAUSE
O 0/3.3 V DC PF control signal
Connected to
PF main
PWB
2 PFSEL2
O 0/3.3 V DC PF select signal
3 PFSEL1
O 0/3.3 V DC PF select signal
4 PFSEL0
O 0/3.3 V DC PF select signal
5 PFRDY
I 0/3.3 V DC PF ready signal
6 PFSET
I 0/3.3 V DC PF set signal
7PFSI
O 0/3.3 V DC Serial communication data signal
8PFSO
I 0/3.3 V DC Serial communication data signal
9PFCLK
I 0/3.3 V DC(pulse) PF clock signal
10 3.3V4
O 3.3 V DC 3.3 V DC power output to PFMPWB
11 +3.3V2
O 3.3 V DC 3.3 V DC power output to PFMPWB
12 SGND
- - Ground
13 NC
-- Not used
YC3
1PGND
- - Ground
Connected to
PF main
PWB
2PGND
- - Ground
3+24V4
O 24 V DC 24 V DC power input from M/EPWB or
PFMPWB
4+24V4
O 24 V DC 24 V DC power output to PFMPWB
YC4
1CLREM
O 0/24V DC PFPFCL: On/Off
Connected to
PF paper
feed clutch
and PF paper
feed motor
2+24V4
O 24 V DC 24 V DC power output to PFMPWB
3MOTB3
O 0/24 V DC(pulse) PFPFM drive control signal
4MOTA3
O 0/24 V DC(pulse) PFPFM drive control signal
5MOTB1
O 0/24 V DC(pulse) PFPFM drive control signal
6MOTA1
O 0/24 V DC(pulse) PFM drive control signal