Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-42
1-5-6 Transfer/Separation section
The transfer and separation section consists mainly of the transfer roller, separation electrode and drum sep-
aration claws.
A high voltage generated by the high voltage PWB (HVPWB) is applied to the transfer roller for transfer charg-
ing.
Paper after transfer is separated from the drum by applying separation charging that is output from the high
voltage PWB (HVPWB) to the separation electrode.
Figure 1-5-71
Figure 1-5-72
5
1
3
7
6
4
2
[Component formation]
1. Left ragistration roller
2. Right ragistration roller
3. Actuator
(Registration sensor)
4. Paper chute guide
5. Drum
6. Transfer roller
7. Separation needle
1
6
3
7
4
2