2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-94
(3) Original switchback/eject sections
The original switchback/eject sections consists of the parts shown in figure. An original of which scanning is
complete is ejected to the original eject table by the eject roller.
An original is conveyed temporarily to the original eject table and conveyed again to the original conveying
section by the switchback roller.
Figure 1-5-164
Figure 1-5-165
6
451
2
3
7
[Component formation]
1. Shift guide
2. Eject roller
3. Eject pulley
4. Switchback roller
5. Switchback pulley
6. Original eject table
7. Du guide wire
6
1
3
2
4
5
7
To Next Page
Loading...
