2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-3-61
U244 Chk DP Switch
Description
Displays the status of the respective switches in the DP.
Purpose
To check if respective switches in the DP operate correctly.
Method
1. Press the start key.
2. Turn each switch or sensor on and off manually to check the status.
Display Description
Switch State of the switch
* : State of the switches are updated regularly.
* : State of the switches are represented by 0:OFF and 1:ON.
* : 7-digit numeric representation, each digit corresponds to the state of the switch.
Example: longitudinal switch is ON : 0000001
set switch is ON : 0000010
feed and timing switches are ON : 0010100
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
7th digit 6th digit 5th digit 4th digit 3th digit 2th digit 1th digit
cover_ open open feed regist timing set longitudinal
To Next Page
Loading...
