2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-83
(14)Detaching and refitting the cooling fan
Procedure
1. Remove the rear cover.
2. Remove the connector (YC-11) of the
electric wires and then release the wire
saddles.
3. Unhook two hooks and then remove the
eject fan motor.
4. Check or replace the eject fan motor
and refit all the removed parts.
Figure 1-5-146
(15)Direction of installing the principal fan motors
When detaching or refitting the fan moter,be careful of the airflow direction (intake or exhaust).
Figure 1-5-147
Eject fan motor
Hooks
Connector
Intake
Eject fan motor
(Rating label: outside)
To Next Page
Loading...
