Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
1-3-28
U051 Adj Paper Loop
Description
Adjusts the deflection in the paper at the registration roller.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the
copy paper is Z-folded.
Method
1. Press the system menu key.
2. Place an original and press the start key to make a test copy.
3. Press the system menu key.
4. Select the item to be adjusted.
Display Description
Setting
range
Initial
setting
Change in value
per step
MPT Paper feed from MP tray. -30 to 20 0 1
Cassette Paper feed from cassette. -30 to 20 0 1
PF Paper feed from paper feeder. -30 to 20 0 1
Duplex Duplex mode (second) -30 to 20 0 1
5. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
Figure 1-3-4
6. Press the start key. The value is set.
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
Original Copy
example 1
Copy
example 2