Kyocera DP-480

2NC/2NF/2NG/2NN/3P7/3P8/3P9-1
1-5-76
(4) Detaching and refitting the right rear cover
Procedure
5. Release three projections by twisting
the right rear cover.
6. Remove the right rear cover by sliding it
to the right and releasing three hooks.
Figure 1-5-134
(5) Detaching and refitting the front upper cover
Procedure
1. Remove the right upper cover.
2. Unhook the hook using flatscrew driver.
3. Remove the front upper cover by pulling
it upward and releasing the projection.
Figure 1-5-135
Right rear cover
Hook
Projection
Hook
Flat screwdriver
Projections
Hooks
Front upper cover