2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-4-8
Conveying
guide,
approaching
guide, feed-
shift guide
1. Check that the foreign
objects including scrips,
paper clips, etc., do not exist
in the paper conveying paths.
If foreign objects such as scrips, etc., remain in the
paper conveying path, remove.
2. Check that the paper
conveying guide and the
separation needles are not
contaminated with toner,
paper dusts, etc.
If dirty, clean the guide, ribs (by a cloth), and the
separation needles (by a cleaning brush).If the ribs of
the conveying guides were broken or deposited with
toner, replace.
3. Check that the paper
conveying guide has no
barrs, deformations, or
abrasions; and it is properly
mounted without being
floated.
Clean the conveying guide or the paper approaching
guide.Remove any protrusions including barrs.If floated,
fix it properly.If deformation or abrasion is observed,
replace.
4. Check that the guide.
Check that the guide is
smoothly operative when
manipulated.
If the guide is inoperative or won't operate smoothly,
replace the guide or the unit.
5. Check that the guide.
Perform U033 to check the
operation of the solenoid to
sight-check or audio-check its
action. (see page 1-3-23)
If the guide is inoperative or won't operate smoothly, re-
assemble the guide or replace the solenoid or the unit.
Check items Check description Corrective measures
To Next Page
Loading...
